Imaje printer need regulating before working. Incorrect regulation will cut the working lifespan of a Imaje printer. Thus, it is strongly recommended to strictly follow operation rules when regulating a Imaje printer.
1, Bottom-spraying printer:
A, Slightly loosen the handle screws of the sprayer;
B, Slide the sprayer to horizontal position and put a paper in front of it; repeat jet-printing until the printing is better;
C, Then adjust the sprayer to the right position and tighten the screws to fix the sprayer. Remember not to change the position of the sprayer if the screw is tight, for this may cause the sprayer cannot be fixed and affect the printing.
2, Handle and move with care. Do not pull out plug directly after power is on, or else the sprayer may have fused.
3, Tangential-spraying Imaje printer:
A, Then put a paper in front of the sprayer;
B, Squeeze the ink bag softly until ink comes out from the sprayer;
C, Spread some cleanout fluid on the sprayer after the Imaje printer starts;
D, Press the strong spray button, meanwhile slide the paper; until lines appear on the paper; if not, repeat step (1-3), until the printing is better. Do this regulation every other day.
The operating staff should read the instruction carefully before operating the Imaje printer. Although many printer manufacturers will provide operation training, however, quite a few Imaje printers breakdown because people do not operate them correctly for the sake of convenience. In a word, operating staff must be careful and patient.
Huax Tech sincerely supplies from all over the world with high quality spare parts and filters of brands of inkjet printers, like Domino Printer, Videojet Printer, Willett Printer, Linx Printer, Imaje Printer, etc.
Notes: The copyrights are owned by Huax Technology Co.,Ltd. Please quote it as reference upon reproduction.
Huax Technology Co.,Ltd.
http://www.huax-printing.com
No comments:
Post a Comment